All surfboard models can be ordered in our Natural, SuperCharger or Carbon 3D construction. Any board ordered in the Hydroflex Natural Construction can be customized with the swirl colored foam or standard white or add some color with a custom resin tint. Part of our 100% customizable options. Order your board any way you want it.
Matt started with a 6’0” Driver, took note of the nose rocker and outline measurements at 4” and 16” back from the tip, then shrunk the board to a 5’8” and lowered the nose rocker at the tip and 12” back till it matched the 4” and 16” from before. He widened the nose until it matched up the same way. This gave them a screaming fast low nose rocker with a forward placed outline, both attributes give tons of drive. Then Matt rounded off the tail, but left the width at 12” the same. This gave them a very clean and elliptical outline that we expected would move free and easy inside the tube. The Lost Mini Driver performed as hoped.
Interestingly enough, one of Kolohe’s buddies (Taylor Clark) grabbed it after it came back from Indo and used it in the US Nationals event in Huntington Beach. He surfed it in 2’ slop all the way to a second place finish in the Open Men’s division. The Lost Mini Driver worked in everything.
Buy a Lost Mini-Driver
Lost Mini-Driver Dimensions
5'4" - 18.25" - 2.18" - (22.5 l)
Trip Foreman explains the Lost Mini-Driver.
"The Lost Mini Driver is a great bigger wave board that can be ridden shorter by a few inches than your traditional shortboard. The Lost Mini-Driver has a slightly flatter rocker with a pulled in tail so it can handle the 2' slop and the macking barrels."
3d-GlassingClick on this button to learn more about 3D-Glassing™ and what's in every Hydroflex Surfboard.
More Lost Surfboards