1-760-757-7006 | Contact | FAQ
3D-Glassing™ Check out what's in every Hydroflex Surfboard

The Supercharger Surfboard Construction


A very lightweight, high performance board.

Our SuperCharger surfboard construction starts with a hand shaped stringerless EPS blank. The flex of the board can be adjusted by increasing or decreasing the amount of compressed air within the surfboard. When the board is "charged," this also help minimize pressure dings, because of the internal pressure. It comes complete with an adapter and pump that allows you to adjust the pressure of the board which changes the flex. To allow the board to have more flex, you simply press down on the needle in the valve with your finger to release air out. This allows you to find your own optimal level of flex for the conditions, as opposed to boards that do not feature adjustable flex.



The hand shaped blank is glassed with our patented 3D-Glassing™ Technology, rooting fiberglass and resin into the foam for a stronger bond. All Hydroflex boards are made with epoxy resin for a natural and lively feel. Epoxy resin is a lighter and stronger resin compared to standard polyester resin and allows for twice the flex before cracking. The other benefit of Epoxy resin is the molecules will not break down over time. This process give you the highest strength to weight ratio available and is coupled with excellent flex characteristics, as well as completely customizable shapes and glassing. Every surfboard that leaves our factory is built with our patented 3D-Glassing™ Technology.


Different Flex Levels for every condition

The flex of the SuperCharger can be adjusted by increasing or decreasing the amount of compressed air within the surfboard. To allow for more flex, simply release air by pushing down on the valve needle. This enables you to adjust your personal flex level preference to the current conditions. An absolute first! An additional benefit of internal pressurization: in case of a crack, no water will ever enter the inside of the board.

MAXIMUM FLEX:
 1 - 3 psi 
Dampening: For very choppy conditions
MEDIUM FLEX:
3 - 4,5 psi
For average surf conditions /
tight turns
MINIMUM FLEX:
4,5 - 6 psi
For very glassy conditions /
longer turns
 NEVER OVERPRESSURIZE!
Exceeding rated pressure can damage or even destroy your board!



Benefits of the SuperCharger Construction



• Based on the lightest possible blank
• Highly flexible & adjustable surfboard construction
• Heaps of pop & lively feel
• Longer lasting flex patterns
• Eliminates delamination
• 100% customizable
• Highest strength-to-weight ratio
• High quality materials
• Vacuum processed for maximum strength
• Superior performance and responsiveness
• Doesn‘t feel rigid or hard
• Multi-Award winning
• Tested by Pro Surfers
• CONNECT MIP AWARD Winner 2011
3D-Glassing™ Engineered in GER / Handmade in the USA ORDER CUSTOMS DIRECTLY FROM THE USA!


Testimonials

Hydroflex Reviews by Mason Ho, Gorkin, Chris Ward, and Andrew Doheny




Construction Options

The Natural - Surfboard Construction


The Natural" is our standard construction with 3D-Glassing™ and the highest quality epoxy resin available. The quality and durability of our surfboards is ensured by the use of certified fiberglass with the strongest weave on the market. This is used across all our models. By passing these certification measures, the engineered glass in every surfboard is the highest quality material you’ll find.



Tech Series

Tech Series - Specialty Surfboard Constructions



Multiple Awarded