Tech Series with 3D-Glassing™ by Hydroflex
Our TechSeries line is a different approach in surfboard construction.
These constructions will only use high-end materials, like carbon,
kevlar and other specialty fabrics. We are always tweaking our construction,
experimenting with new materials, and trying to think outside the box to
advance surfboard technology. Our TechSeries boards will come directly from our
R+D lab with feed back from top surfing pros. The TechSeries boards will
not be mass-produced and will be limited, and will only be available through
custom orders through retailer shops that carry Hydroflex Boards and our
ONLINE CUSTOM ORDER FORM
If surfing were Bruce Wayne’s thing, this would be his board...
The Carbon 3D surfboard construction features a handshaped stringered PU blank.
It is wrapped with a high tech carbon fiber material called TeXtreme®.
The hand shaped blank is glassed with our patented 3D-Glassing™ Technology,
rooting fiberglass and resin into the foam for a stronger bond.
The Carbon 3D boards are very light weight and responsive with a very
responsive flex. Ultra lightweight and super strong high performance surfboard
developed with Josh Kerr.
A very lightweight, high performance board. Our SuperCharger surfboard construction starts with a hand shaped stringerless EPS blank.
The flex of the board can be adjusted by increasing or decreasing the amount of compressed air within the surfboard. When the board is "charged,"
this also help minimize pressure dings, because of the internal pressure. It comes complete with an adapter and pump that allows you to adjust the
pressure of the board which changes the flex. To allow the board to have more flex, you simply press down on the needle in the valve with your finger
to release air out. This allows you to find your own optimal level of flex for the conditions, as opposed to boards that do not feature adjustable flex.
The core of the board is made of Varial Foam. It’s not a variation of PU or EPS…
it’s an advanced aerospace formula. The strength of Varial Foam eliminates the need
for a stringer, carbon graphite strips or any other strengtheners. A more consistent
foam formula that gives you a pure and repeatable base to build from while having a
uniform density throughout the entire core. The rigidity of the foam makes the board
highly responsive as it transfers energy directly through the core to the water’s surface
without compromising overall flex. Varial foam also boasts a higher compression to
weight strength meaning less pressure dings. The rigidity of the foam makes the
board highly responsive as it transfers energy directly through the core to the water’s
surface without compromising overall flex. That, combined with 20% more strength
and 25% less weight than a stringered PU board is a beautiful thing. Meaning a
strong and very durable surfboard.